Relief, climate and landscapes

What lifts a mountain range? Plates, folds, faults and volcanoes

Abstract illustration of contour lines in amber tones, like a relief map

The Himalaya run for about 2,900 km (1,800 miles) along the border of India and Tibet, and the U.S. Geological Survey (USGS) dates the start of their rise to between 40 and 50 million years ago. The Appalachians of eastern North America are far lower, yet their story begins much earlier, in a collision that the U.S. National Park Service (NPS) places 500 to 300 million years ago. Two ranges, two very different ages and heights, and one shared set of causes.

Mountain ranges are not scattered at random. They follow narrow belts that trace the edges of tectonic plates, the large slabs of rock that make up Earth's outer shell and move by a few centimeters a year. Below, we explain what happens at each kind of plate edge, how rock is folded, broken or melted into relief, and which clues to look for on a map.

Plate boundaries and the ranges they build

The USGS sorts plate edges into three main kinds. At divergent boundaries the plates pull apart and new crust forms. At convergent boundaries they move toward each other and crust is destroyed. At transform boundaries they slide horizontally past each other. Most movement happens along narrow zones between plates, which is why mountains line up in long belts instead of spreading evenly across a continent.

At convergent boundaries the outcome depends on which kinds of crust meet. When an ocean plate meets a continent, the ocean plate dives beneath the other plate. That process is called subduction, and the sinking zone is a subduction zone. When two continents meet, neither sinks easily because continental rock is relatively light. The USGS compares them to two colliding icebergs: the crust buckles and is pushed upward or sideways.

Plate settings and the mountain features they produce
SettingWhat happensTypical landscapeExample
Continent meets continentNeither plate sinks; crust crumples and thickensBroad, high, folded ranges and plateausHimalaya and the Tibetan Plateau
Ocean plate sinks under a continentThe overriding plate is lifted and volcanoes form inlandLong coastal range with a deep offshore trenchAndes, Cascade Range
Ocean plate sinks under another ocean plateVolcanoes grow up from the sea floorCurved chains of volcanic islandsAleutian and Mariana Islands
Plates pull apartMagma rises and new crust formsRidges under the sea, rift valleys on landMid-Atlantic Ridge, East African Rift
Plates slide past each otherCrust is sheared sidewaysOffset ridges and long fault linesSan Andreas fault zone

Folding, faulting and volcanism

Plate motion is the engine. The rock itself responds in three main ways, and many ranges show more than one of them.

Folding and thrusting

When continents collide, layered rock is squeezed like a rug pushed across a floor. Layers bend into folds, and where the rock breaks, one slab is shoved up and over another along a thrust fault. The NPS describes a collisional range as crust that is compressed, crumpled and thickened. The Alps are a European example: the Geological Society says the Alpine orogeny, the mountain-building episode that followed the closing of the Tethys Ocean between Africa and Eurasia, ran mainly from 65 to 2.5 million years ago and is still active.

Normal faulting and fault-block ranges

Not every range comes from squeezing. Where the crust is stretched, it breaks along faults and whole blocks rise, drop or tilt. The NPS describes the mountains of much of the Great Basin, in the western United States, as large blocks of rock uplifted and tilted along faults, with neighboring basins that dropped and then filled with sediment from the ranges. Geologists call these fault-block mountains. On a map they show up as parallel ranges separated by flat basins.

Volcanism

Where a plate sinks into the mantle, water released from the sinking rock helps make magma, which rises and builds a chain of volcanoes. The NPS says the Cascade volcanoes form where the subducting Juan de Fuca Plate reaches a depth of about 80 km (50 miles). These volcanic arcs add height on top of the uplift. The article on volcanoes and the Ring of Fire shows where such arcs cluster around the Pacific.

Young ranges, old ranges and the work of erosion

Height and age are different things. Ranges rise while plates push, then wear down for as long as they stand. The NPS says the Appalachians formed in a continental collision 500 to 300 million years ago, probably with peaks as high as those in the modern Himalaya-to-Alps collision zone, and that as much as 25 km (15 miles) of rock has since been removed. Their highest points, such as Clingmans Dome at 2,024 m (6,642 feet), are eroded remnants.

Erosion also changes the balance below the surface. The NPS notes that the crust rises again when erosion removes weight from a range, a process called isostatic rebound, so the net lowering is smaller than the amount of rock stripped away. The Himalaya sit at the other end of the scale. The USGS says the collision of India and Eurasia has yet to end, and that the neighboring Tibetan Plateau has an average elevation of about 4,600 m.

Four well-known ranges, with the timing reported by the sources listed below
RangeWhat built itTiming reported
HimalayaCollision of India and EurasiaCollision began 40 to 50 million years ago and has not ended (USGS)
AlpsCollision of Africa and Eurasia after the Tethys Ocean closedMainly 65 to 2.5 million years ago, still active (Geological Society)
AppalachiansContinental collision500 to 300 million years ago; heavily eroded since (NPS)
AndesNazca Plate sinking beneath the South American PlateConvergence continues (USGS); the uplift history is debated, so we give no single date

Reading mountain-building clues on a map

A physical map lets you test these ideas yourself. Start with the shape of the high ground, then look at what sits beside it. Contour lines, covered in contour lines and elevation, show how steep each flank is, and a map that shows the sea floor can reveal trenches and ridges that a land-only map hides. Mountains also decide where rivers begin, a link explored in rivers and drainage basins.

Clues that point to a mountain-building setting
  • A long, narrow belt of high ground rather than a round block
  • A deep ocean trench offshore with a line of volcanoes inland, a sign of subduction
  • A curved chain of volcanic islands, a sign of one ocean plate sinking under another
  • Parallel ridges separated by flat basins, the pattern of stretched crust
  • A high plateau beside a young range, as Tibet lies beside the Himalaya
  • Lower, rounded ridges in a long belt, which can mean an old range worn down by erosion

If you record the ranges you have crossed, a note on the travel map editor can include the range name and the kind of boundary behind it. Landforms beyond the ranges themselves, such as the flat country around them, are covered in plains, plateaus and valleys.

Common mistakes when explaining mountain ranges

  • Assuming tall means old

    The Himalaya are the highest range and also among the youngest of the ranges described here. The Appalachians are much older and far lower. Height reflects recent uplift and slow erosion, not age alone.

  • Treating every range as a collision

    Collisions build folded ranges, but fault-block ranges come from stretching and volcanic arcs come from subduction. Match the range to its boundary type before naming a cause.

  • Picturing plate motion as sudden

    The USGS gives about 2.5 cm per year as the average spreading rate along the Mid-Atlantic Ridge, or 25 km in a million years. Ranges are the sum of very slow motion over millions of years.

  • Using one date for a whole range

    Ranges grow in stages. The Appalachian figure spans 500 to 300 million years, and the Alpine figure spans 65 to 2.5 million years. Quote the window and the source, not a single year.

  • Forgetting the mountains under the sea

    The Mid-Atlantic Ridge is a submerged mountain range that the USGS says extends from the Arctic Ocean to beyond the southern tip of Africa. A land-only map leaves out most of the planet's mountain belts.

Frequently asked questions

What is the difference between folded, fault-block and volcanic mountains?

Folded mountains form when colliding crust is compressed and crumpled, as in the Himalaya and the Alps. Fault-block mountains form when stretched crust breaks and blocks are uplifted and tilted, as in the Great Basin. Volcanic mountains are built from erupted material, often above a subduction zone.

Are the Himalaya still rising?

The USGS says the collision between India and Eurasia has yet to end and that the range is still rising. It adds that the Eurasian Plate may now be stretching rather than thrusting upward, which could be one reason the range is not higher.

Why are the Appalachians lower than the Alps or the Himalaya?

They are much older. The NPS dates their formation to 500 to 300 million years ago and says as much as 25 km of rock has been removed since. The Alps and the Himalaya are younger and have had far less time to wear down.

Which plates built the Andes?

The USGS explains that the oceanic Nazca Plate is subducted beneath the continental part of the South American Plate along the Peru-Chile trench. The overriding South American Plate is lifted, which creates the Andes.

Are there mountain ranges on the ocean floor?

Yes. The Mid-Atlantic Ridge is part of a global mid-ocean ridge system that the USGS describes as encircling the Earth. Iceland is one place where a ridge of this kind rises above sea level.

Sources

  1. Understanding plate motions [This Dynamic Earth] U.S. Geological Survey
  2. The Himalayas: Two continents collide [This Dynamic Earth] U.S. Geological Survey
  3. Convergent Plate Boundaries—Collisional Mountain Ranges U.S. National Park Service
  4. Convergent Plate Boundaries—Subduction Zones U.S. National Park Service
  5. Faults - Great Basin National Park U.S. National Park Service
  6. Alpine Orogeny The Geological Society

Keep a record of the places you have been, and see what share of the world you have covered.

Open the travel map editor