Understanding maps

How a modern map gets made, from survey marks to GIS software

Abstract illustration of a map grid with curved meridians and parallels in blue tones

Since the middle of the 20th century, aerial images have been the main source of data that the USGS and similar agencies use to create and revise topographic maps. Before that, mapmakers compiled sheets in the field with magnetic compasses, tapes and plane tables, which are drawing boards on tripods, and even estimated elevation from changes in air pressure.

Today the pipeline is longer and more digital. A map on a screen is rarely one drawing. It is a stack of datasets collected in different ways, on different dates, to different levels of detail. Knowing the main sources explains why two maps of the same place can disagree, and why a date is as useful as a scale.

Ground control ties a map to the Earth

Every map starts from points whose positions are known with great care. In the United States, NOAA's National Geodetic Survey maintains a network of permanently marked points, usually brass, bronze or aluminum disks set in the ground, along with a network of continuously operating satellite positioning receivers. NOAA states that this network contains more than a million survey points, and that it exists so that coordinates determined by different people are compatible. Maps, property boundaries and structures then match up.

Penn State's course on geographic information adds that field surveys remain important for establishing horizontal and vertical control, even though photogrammetry has improved the efficiency and quality of topographic mapping. Control also depends on the datum, the reference model against which coordinates are measured. The USGS reports that in the conterminous United States, the shift between two older and newer datums moves the latitude and longitude grid by 10 to 100 ground meters. A mismatch like that is the reason layers from different sources sometimes do not line up. The coordinates themselves are explained in latitude and longitude.

Collecting the raw data with aerial photographs, satellites and lidar

NASA defines remote sensing as acquiring information from a distance, using instruments on satellites and aircraft that detect reflected or emitted energy. Passive instruments detect energy emitted by the natural environment, such as reflected sunlight. Active instruments send out their own energy and measure the return signal. NASA also lists four kinds of resolution that decide how data can be used: spatial, spectral, temporal and radiometric. Spatial resolution is the smallest horizontal distance between successive elements of data.

Main sources of map data
SourceHow it worksWhat it addsLimit to remember
Aerial photographsA camera on an aircraft photographs the ground along parallel flight lines with overlapDetailed images; overlapping pairs allow terrain to be measured in three dimensionsNeeds correction for relief; one season and date per flight
Satellite imageryPassive or active instruments record reflected or emitted energy from orbitWide coverage that can be repeated over timeDetail is limited by spatial resolution
LidarAn aircraft laser scanner, GPS and inertial unit time pulses reflected from the groundHigh-resolution elevation modelsRaw data includes treetops and roofs until they are stripped away
Field surveyCrews measure positions and heights on the groundControl points and checks for the other sourcesSlow over large areas

Aerial mapping depends on overlap. Penn State notes that photographs must overlap end to end and side to side so that they can be viewed in stereo, and that about 10 overlapping photographs along two adjacent flight paths give stereo coverage for one USGS 7.5-minute quadrangle. Lidar, in the USGS description, collects a cloud of points reflected from everything on the surface, including structures and vegetation. Removing them produces a “bare earth” elevation model, the raw material for contour lines like those in contour lines and elevation.

From data to map with GIS, layers and cartography

NOAA describes a geographic information system, or GIS, as a computer system that captures, stores, checks and displays information related to positions on Earth's surface. Its strength is the link between a position and a record: a point is not only a dot, it carries a name, a type and a date. Digital map data usually comes in two shapes. Vector data stores points, lines and areas with attributes. Raster data stores a grid of cells, as in a satellite image or a shaded relief picture.

Layers are what turn data into different maps. Mapmakers keep cultural layers, such as countries and populated places, apart from physical layers, such as coastlines and rivers, a split explained in political vs physical maps. A map is built by switching layers on, choosing a projection and a scale, and then deciding which features to show, simplify or drop.

  1. Establish control from survey marks and satellite reference stations.
  2. Capture imagery, lidar and field measurements.
  3. Extract roads, water, buildings and terrain into layers with attributes.
  4. Choose a projection and a scale, as described in map projections.
  5. Simplify and symbolize the features so the map stays legible, following the ideas in map symbols and legends.
  6. Check, publish and plan the next update.

A map you build in the travel map editor follows the same pattern in miniature: a base map prepared by others, with your own marks on top.

Reading a modern map with care for dates, resolution and accuracy

A modern map looks seamless, but its parts are not. Imagery shows one moment. Penn State points out that a large US aerial imagery program is flown with leaves on the trees, so features under dense foliage can be hidden. Layers can come from different years and different agencies, and elevation may be newer than road data.

Questions to ask of any map
  • What is the date of the data or the imagery, and is it stated?
  • Who produced the layers, and how are the sources credited?
  • Is the zoom level beyond what the resolution can support?
  • Do the layers share the same datum and projection?
  • Does a second source agree on the feature you care about?

The scale printed on a map is a promise about detail, as explained in map scale explained. On screens, zooming in does not create new detail. It only enlarges the data that exists.

Common mistakes about how maps are made

  • Treating a satellite image as a live view

    An image records the instant it was captured, and different parts of a mosaic may come from different dates. Look for the acquisition date.

  • Assuming all layers are equally accurate

    Layers from different datums or sources can be shifted by tens of meters. Do not trust small offsets between them.

  • Zooming past the resolution of the data

    A blurry or blocky view means you have reached the limit of the data, not a fault in the screen.

  • Confusing an image with a map

    An image shows everything visible. A map selects, classifies, simplifies and labels. That choice is the cartographer's work.

  • Treating a single GPS reading as a survey

    Positions become reliable when tied to control and corrected with reference stations, as NOAA describes for surveyors.

Frequently asked questions

How are maps made today?

Mapmakers start from survey control, collect imagery, lidar and field measurements, extract features into digital layers, choose a projection and scale, then simplify and symbolize the features. The result is checked and updated as new data arrives.

What is GIS?

A geographic information system is a computer system that captures, stores, checks and displays information related to positions on Earth's surface. It links places on a map with data about them.

What is lidar and what does it add to maps?

Lidar uses a laser scanner, GPS and an inertial unit on an aircraft to time pulses reflected from the ground. The USGS says it produces high-resolution elevation models, which are the basis for contours and terrain shading.

Why do coordinates sometimes shift between two maps?

They may use different datums. The USGS reports a shift of 10 to 100 ground meters between two older and newer datums in the conterminous United States, so layers on mixed datums do not match exactly.

How do satellites collect information about the ground?

Their instruments detect energy. Passive instruments record reflected or emitted energy, while active instruments send a signal and measure what returns. The data is then processed before mapmakers use it.

Sources

  1. 10. Photogrammetry (The Nature of Geographic Information) The Pennsylvania State University
  2. The National Spatial Reference System NOAA National Ocean Service
  3. What is Lidar data and where can I download it? U.S. Geological Survey
  4. How large is the North American Datum of 1927 (NAD 27) to NAD 83 shift? U.S. Geological Survey
  5. Remote Sensing NASA Earthdata
  6. What is GIS? NOAA National Ocean Service

Keep a record of the places you have been, and see what share of the world you have covered.

Open the travel map editor