What the colors and symbols on a map are telling you
On a USGS topographic map, a single house can appear as a small black square. In a densely built-up area, the same map leaves most houses out and tints the whole district instead. Neither choice is an error. The mapmaker is deciding what a mark stands for, and the choice changes with the size of the feature and the space available.
That is the working principle of every map: each mark is a coded statement, and the legend is the key to the code. The same blue or green can mean different things on two maps. Reading symbols well means treating the legend as part of the map, not as decoration at its edge.
Points, lines and areas are the building blocks of map symbols
The USGS guide to topographic map symbols explains that features are shown as points, lines or areas, depending on their size and extent. A building is a point or a small shape. A road or a stream is a line. A forest or a lake is an area, usually filled with a tint. Lines may be solid, dashed, dotted or any mix of these, and each style is a separate piece of information.
Text is the fourth ingredient. Names of places and features are set in a color that matches the type of feature, and many features carry a short label such as “Substation” or “Golf Course.” The USGS adds that symbols are constantly refined to improve readability, so maps in the same series may use slightly different symbols for the same feature.
Scale drives many of these choices. On the USGS maps, the actual outlines of larger buildings are drawn, while in crowded districts a tint replaces most of them. Ordnance Survey calls the general process generalisation: an airport drawn with runways and buildings on a large-scale map shrinks to a single point symbol on a small-scale one. The same place can therefore look different on a city map and a country map, which is why map scale explained pairs well with this guide.
| Mark | Stands for | Examples |
|---|---|---|
| Point | A small or precisely located feature | Buildings, campgrounds, springs, wells, survey control points |
| Line | A linear feature or a boundary | Streams, roads, railroads, boundaries, contour lines |
| Area tint | A feature with extent | Vegetation in green, water in blue, built-up areas in gray or red |
| Label | A name or a note | Place names and short descriptions |
How color encodes information
Color does two different jobs, and mixing them up causes most misreadings. In one job it names a category. On a USGS topographic map, vegetation is green, water is blue, contours are brown, land grids and important roads are red, and other roads, trails, railroads and boundaries are black. These are conventions, not laws. They hold across many maps, but the legend has the last word.
In the other job, color shows quantity. The ColorBrewer color tool, created by Cynthia Brewer, Mark Harrower and The Pennsylvania State University, sorts color schemes into three types according to the data they suit. Knowing which type a map uses tells you at once whether a darker shade means more of something or simply something different.
| Type | Suits | How it works | Question it answers |
|---|---|---|---|
| Sequential | Ordered data from low to high | Light colors for low values, dark colors for high values | How does the value change from place to place? |
| Diverging | Data with a meaningful middle | A light middle class and darker, contrasting hues toward both extremes | Which places are above or below the mean or zero? |
| Qualitative | Categories with no order | Different hues with no suggestion of more or less | Which kind of thing is it? |
Your own maps follow the same logic. When you choose a style for your travel map, two colors for visited and not visited form a simple qualitative scheme, and the legend should say so.
How to read a legend step by step
- Find the legend, also called the key, before you read the map. It may sit in a corner, a margin or a separate page.
- Match each symbol, line style and color to its entry. Do not assume a familiar color means the usual thing.
- For data maps, read the classes and their break values, and note the units.
- Look for the scale, the date and the source, which usually sit near the legend.
- Check the margin for values that change from map to map, such as the contour interval.
Margins matter for relief maps too. The USGS notes that the contour interval, the elevation difference between adjacent contour lines, is printed in the margin of each map, since it is chosen to suit the terrain. Contour lines and elevation shows how to use it. For how legends work in a bound volume, see how to read an atlas.
- Is there a legend, and does it list this color?
- Is the scheme ordered, or does it only separate categories?
- Do the class breaks hide large differences inside one color?
- Are the units and the date stated?
- Could this map belong to a different series with slightly different symbols?
Common mistakes with map symbols and legends
- Assuming a color means the same on every map
National Geographic Education notes that symbols, colors and labels can differ drastically from map to map. Even inside one USGS series, a feature may be drawn differently over time.
- Reading order into categories
With a qualitative scheme, no hue is higher or lower than another. A dark color on a land cover map does not mean more of anything.
- Ignoring class breaks
A single shade can cover a wide range of values. Read the break points before comparing two regions that share a color.
- Overlooking line styles
Solid, dashed and dotted lines are separate symbols. A dashed line and a solid line of the same color can stand for different things, so check the entry in the legend.
- Using an ordered scheme for categories
On your own map, a light-to-dark scheme suggests a ranking. If the classes are only different kinds, use distinct hues.
Frequently asked questions
What is a map legend?
A legend, also called a key, is the list of symbols, lines and colors used on a map and what each one means. It often includes the bar scale as well, so it is the first thing to read.
Why is water usually blue on maps?
Blue is the common convention for water, including on USGS topographic maps, where lakes, streams and other hydrographic features are blue. It is a convention, so confirm it in the legend.
What do the line colors on a USGS topographic map mean?
Brown lines are contours, blue lines are water features, red marks land grids and important roads, and black marks other roads, trails, railroads and boundaries. Area tints add green for vegetation.
What is the difference between sequential and diverging color schemes?
A sequential scheme runs from light to dark to show low to high values. A diverging scheme puts a light color at a meaningful middle value, such as the mean or zero, and uses darker, contrasting hues toward both extremes.
Why does the same feature look different on two maps?
Mapmakers choose symbols to suit the scale, the purpose and the available space. The USGS notes that its own symbols are refined over time, so maps in one series can differ in small ways.
Sources
- Topographic Map Symbols U.S. Geological Survey
- Color scheme types ColorBrewer, Cynthia Brewer and The Pennsylvania State University
- Maps National Geographic Education
- Scale (More than Maps: guide to cartography) Ordnance Survey